 |
 |
 |
|
Viking Electronics' PP-250 - 250-Watt 70V eXpation Paging Power Amplifier that can drive up to two hundred fifty (250) 70V speakers and/or paging horns (each speaker set to “1 Watt tap”). The only1-Rack Units (1U) rack size chassis is possible because the PP-250 uses new amplifier technology that is 3-times more efficient than old school designs competitors use. The high efficiency of the PP-250 means much less heat dissipation, smaller size, higher reliability, and lower cost.
There are many advantages of using a 70V distributed audio paging system, such as being able to put more speakers on a wire run, having longer speaker wire runs, using smaller gauge wire, and being able to set the volume of each speaker independently. The PP-250 Line Input can connect to telephone system paging ports, paging mixers, etc.
eXpantion for:
- Viking PA-250 - 250-Watt Telecom Paging Amplifier
- Viking PA-250-IP - 250-Watt 70V SIP/Multicast Paging Amplifier
Applications:
- Paging systems requiring 8 to 250 speakers
- Paging from virtually any POTS (Plain Old Telephone Service), Centrex, PABX, Digital Phone System’s analog port
Installations that can utilize the below advantages of a 70V distributed audio system:- Allows for longer wire runs using smaller gauge speaker wire to save costs
- Many more speakers can be connected on the same wire run to save costs
- Each speaker’s volume can be individually set using its own power taps
Please - Call for Price and Availability
Power: 100V to 240VAC 50 to 60Hz
Environmental: 0°C to 32°C (32°F to 90°F) with 5% to 95% non-condensing humidity
Talk Battery: 42V DC
Paging Output: Capable of driving 250 watt load of 70V speakers
Connections: (1) 3.5 mm (1/8") audio jack, (22) removable cage clamp screw terminals, (2) IEC C8 AC power inlets
Power Cord: Dual IEC C7 plugs "Y" Power Cord included
Dimensions: Approx. 19 x 1.75 x 6" (483 x 44.5 x 153 mm)
Shipping Weight: ? lbs. ( kg)
Certifications:
FCC Part 68
FCC Part 15
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features & Benefits:
- Powerful 70V amplifier drives up to 250-Watt load
- Page from any analog telecom port, or a direct microphone
- Auxiliary and Background Music inputs
- Individual and Master volume controls
- Bass and Treble controls
- LEDs show audio level and activity
- Programmable input priorities
- Choose between 3-different chime sounds
- Provides Loud Ringing / Night Bell
- Night Transfer switch input
- 600 Ohm output to drive additional amplifiers
- Adjustable Automatic Level Control
- Peak limiter and multiple protection modes
- Sporting the Red Viking logo
|
|
|
|
|
|
| PRODUCTS RELATED TO THIS ITEM - CUSTOMERS BOUGHT |
|
|
|
|